Why midday light is harsh
Midday sun is high, so it lights the scene from above. Shadows are short and fall directly beneath objects, and the contrast between bright ground and dark shadow is strong. A camera sensor often cannot record both the highlights and the shadows in one frame, so one side clips or goes dark.
The sun’s height follows a simple relationship. At local solar noon, the sun’s elevation is roughly 90° minus your latitude plus the sun’s declination, which moves between about −23.4° and +23.4° over the year. At 40°N, that puts the noon sun near 73.5° at the June solstice and near 26.5° at the December solstice. Midday light is at its harshest in summer, when the sun is high for much of the day.
Reading the light
Midday light is not the same everywhere, so look at what it is doing before you shoot:
- Hard shadows from ridges, ledges and trees can create useful lines and graphic shapes.
- Moving cloud shadows can spotlight one part of the landscape while the rest stays in sun. Waiting for a shadow to cross your subject can be worth the time.
- Reflected light from water, sand or snow can add fill, so the shadows may be less dark than they look.
Subjects and framing that work in midday sun
Some subjects handle high, flat light well:
- Intimate landscapes. Rock texture, water-worn stone, sand ripples and plants look good in any light. A telephoto lens can isolate a small piece of scene and leave out an empty sky.
- Forests and waterfalls under overcast skies. Cloud softens the light, so these work at any hour.
- Black and white. Strong shadows and bright highlights suit monochrome, and the light becomes a subject in itself.
- Clear, shallow water, where sunlight can reach the bottom and show detail.
When the sky is empty and bright, consider leaving it out. Tilt the camera down or use a longer lens so the frame is filled by the land.
Exposure in bright sun
For a quick check, use the sunny 16 rule: at f/16 in full sun, use a shutter speed of about 1/ISO. At ISO 100, that is 1/100 s. It is a starting point for checking your meter, not a replacement for it. Look at the histogram after each test frame.
On sunny days, use ISO 100 or your camera’s base ISO. Daylight usually supplies enough light, and raising ISO adds noise without much gain.
For high-contrast scenes, bracket 3 frames at ±2 EV. You can then pick the frame that holds the most detail, or blend the frames in editing. Expose so the sky does not clip, then check whether the shadows still hold detail.
Filters for midday shooting
Polarizer. A circular polarizer works best when the sun is about 90° to the direction you are shooting. Looking toward or away from the sun, it does very little. It costs about 1 to 2 stops of light. On wide-angle lenses, roughly 24 mm and shorter on full frame, it can darken the sky unevenly, so check the corners. It is also useful for cutting glare on wet leaves and water.
Neutral density (ND) filters. A 6-stop or 10-stop ND lets you use long exposures in daylight. With 10 stops, a 1/30 s base exposure becomes roughly 30 s. Use a sturdy tripod and a remote or timer.
Graduated ND filters. These are dark on top and clear below. They balance a bright sky against a darker foreground. Soft-edge versions suit uneven horizons, and hard-edge versions suit flat ones. Midday sky can still be brighter than a graduated filter can balance, so check the result.
Using the sun in the frame
If you want a sunstar, stop down to about f/11 to f/22 and partly hide the sun behind a ridge, tree or other object. The number of points follows the aperture blades: an even number gives that many points, and an odd number gives roughly double. Sun in the frame also increases flare, so inspect the image for ghosting.
Black and white at midday
Strong shadows and bright highlights make monochrome work well. Look for shapes and textures, and think of the photo as a study of light and form rather than a record of the subject. For conversion steps, see black and white landscape photography.
What editing can and cannot fix
Recovering shadows and blending exposures can help with a high-contrast scene. HDR does not fix flat, directionless light, and lifting heavily underexposed shadows adds noise. Hard, overhead shadows also give away the time of day, so editing cannot make midday look like golden hour. For that, shoot at the right time. The golden hour pillar explains how.
Safety
- Never look at the sun through an optical viewfinder, especially through a telephoto lens. Use the screen or live view when the camera points near the sun.
- Do not leave a long exposure aimed at the sun at wide apertures. It can damage the sensor or shutter, so cover the lens or move the camera away when you’re done.
- Protect yourself from UV. UV is strongest around solar noon. Carry water and sun protection.
Common misconceptions
- Midday is not unusable. It suits some subjects and is useful for scouting.
- A polarizer does not always improve the sky. It works best at right angles to the sun.
- HDR does not fix flat light. Better light fixes it.
- Sunny 16 is a starting point. Check the histogram.
Where to go next
- If you can shift your shoot, golden hour gives lower, warmer light for most landscapes.
- What is the best time of day to take landscape photos? compares midday with the other windows.
- Overcast days suit flowers too, as covered in spring nature photography.