Light and Conditions

How to Photograph the Milky Way Over a Landscape

How to photograph the Milky Way over a landscape: plan season and moon, set exposure with the NPF rule, focus on a star, and blend a clean foreground.

On this page
  1. When the galactic core is up
  2. Choose a dark site
  3. Gear that matters
  4. Exposure: the 500 rule and the NPF rule
  5. Starting settings
  6. Focus on a star
  7. Frame the core with a landscape
  8. Stacking and blending for cleaner results
  9. Light pollution and white balance
  10. Safety and dark-sky etiquette
  11. Common mistakes
  12. Where to go next

When the galactic core is up

The brightest part of the Milky Way, the galactic core, lies toward the constellations Sagittarius and Scorpius. It is visible from Earth only for part of the year, and the timing depends on your latitude.

In the Northern Hemisphere, the core is visible roughly from February to October and is best from about April to August. In the Southern Hemisphere, it is high overhead around June and July. Check a planning app for your location and date. PhotoPills, Stellarium and Planit Pro can all show where the core will sit.

Two other conditions matter:

  • Astronomical darkness. The sun needs to be more than 18° below the horizon. Blue hour and twilight light fade before that point.
  • No moon, or a moon that has set. Moonlight washes out faint detail. Shoot near the new moon, or after the moon has set.

Choose a dark site

Light pollution flattens the sky. The Bortle scale rates sky brightness from 1 (very dark) to 9 (inner city). Aim for a site around 1 to 3. A site at 4 can work, but the Milky Way will look weaker.

Scout in daylight. Look for foregrounds such as rock, trees or a water edge, and check where the core will sit in the sky.

Gear that matters

  • A wide, fast lens. On full frame, 14 to 24 mm at f/1.4 to f/2.8 is common. Check the corners for coma, which makes stars look smeared.
  • A sturdy tripod. The sky is dim, so the camera must not move.
  • A timer or remote. A 2-second timer or remote avoids shake.
  • Image stabilization off. Turn it off on a tripod.
  • A star tracker (optional). A tracker allows longer sky exposures, but it needs careful polar alignment and adds weight. You can get good results without one.

Exposure: the 500 rule and the NPF rule

Stars move across the sky while the shutter is open, so exposure has a limit. Two rules of thumb help:

  • The 500 rule estimates the longest shutter speed as 500 divided by the focal length, adjusted for crop factor on a cropped sensor. At 20 mm on full frame, that gives about 25 seconds. It is approximate and ignores sensor resolution, so stars may still smear.
  • The NPF rule factors in aperture, pixel size and focal length. It usually gives shorter, more accurate limits. Many planning apps calculate it for you.

If you want sharp stars when you look closely at the image, the NPF figure is the safer guide. Test your own camera and lens.

Starting settings

These are starting points, not final settings:

  • Lens: wide, around 14 to 24 mm on full frame.
  • Aperture: f/2.8, or the widest aperture that still gives sharp stars on your lens.
  • ISO: around 3,200 to 6,400, depending on the sky and your sensor. See what ISO to use for landscape photography for when to raise it.
  • Shutter speed: about 10 to 20 seconds, with the NPF figure as your limit. The 500 rule often gives longer times than the stars can take.
  • White balance: about 3,800 to 4,500 K, with RAW files.

Check the histogram rather than the screen’s brightness. Keep the peak clear of the left edge without clipping the brightest star clouds.

Focus on a star

Autofocus rarely works in the dark. Switch to manual focus, point the lens at a bright star or a distant light, and magnify live view by 5 to 10 times. Turn the focus ring until the star is smallest and sharpest. Some photographers rack slightly past focus and back again to take up play in the ring. Then tape the ring so it doesn’t move.

Don’t rely on the infinity mark on the lens. It is rarely exact for night work.

Frame the core with a landscape

  • Plan the core’s position with a sky app, so you know where it will sit against the land.
  • Choose orientation. A vertical frame suits the arc overhead, and a horizontal frame suits a wide landscape.
  • Anchor the foreground. A rock, tree, ruin or water reflection gives the sky a reason to be in the frame.
  • Use leading lines. A path or shoreline can guide the eye toward the core.

For more on these techniques, see how to use foreground interest in landscape photography and how to use leading lines in landscape photography.

Stacking and blending for cleaner results

Stacking combines several frames to reduce noise. Shoot 10 to 20 identical frames, then combine them in stacking software. Keep the settings and framing the same across the set.

For a sky-and-ground image, blend in a foreground shot taken from the same position. A low-ISO frame or a blue-hour foreground can look cleaner than a very dark night foreground. Mask the horizon carefully and match the color and brightness across the seam.

Light pollution and white balance

Light pollution can tint the sky orange or gray. Filters can reduce some lamp light, but they don’t remove skyglow, especially from LED lighting. A darker site is the better fix.

For white balance, a fixed setting around 3,800 to 4,500 K gives a natural sky. Avoid auto white balance, which can change from frame to frame and complicate stacking and panoramas.

Safety and dark-sky etiquette

  • Scout in daylight, and mark your tripod position.
  • Tell someone your plan, including your route and when you expect to be back.
  • Use red light. White light ruins night vision, and it can take 20 to 30 minutes to adapt again.
  • Watch for cliffs, drops and wildlife.
  • Keep light low for others. Point headlamps down and keep car lights off the scene.

Common mistakes

  • Assuming the 500 rule guarantees sharp stars. It doesn’t.
  • Trusting the infinity mark for focus.
  • Blaming high ISO for noise. Underexposure causes most noise. More exposure, or more frames to stack, usually helps more.
  • Shooting in the wrong season or with a bright moon up. Check the planning app first.

Where to go next

The complete guide to light and conditions

Golden Hour Landscape Photography: Shooting the Best Light
Read the guide

Keep exploring

Guides from other topics

All topics →