Most landscape photos start from the same few settings: aperture priority or manual mode, an aperture between f/8 and f/11, base ISO (usually 100), RAW capture, and a tripod when the light is low. Shutter speed is the setting you change most, because it depends on the light and on how much motion you want to show. Treat these as starting points rather than rules, and check the result on the histogram and at 100% magnification.
Starting settings at a glance
| Setting | Starting point | Why |
|---|---|---|
| Mode | Aperture priority or manual | Aperture priority sets depth; manual keeps exposure identical across frames |
| Aperture | f/8 to f/11 on full frame | Balances depth of field against diffraction softening |
| ISO | Base ISO, usually 100 | Least noise and the most dynamic range |
| Shutter speed | Set by the light and the motion you want | Freezes or blurs movement; slow speeds are fine on a tripod |
| Focus | Manual in magnified live view, or one AF point placed by hand | Keeps the sharp zone where the scene needs it |
| File format | RAW | More room to recover highlights and shadows |
| White balance | Auto in RAW, or a fixed daylight setting for a series | Easy to adjust later in RAW |
| Support | Tripod with a 2-second timer or remote release | Prevents shake during slow exposures |
Base ISO differs between cameras. Some Nikon bodies start at 64, and many Fujifilm bodies start around 125 to 160, so check your camera’s base value before you set it.
What aperture is best for landscape photography?
For most full-frame landscape work, f/8 to f/11 is the usual starting range. Most lenses are sharpest a couple of stops down from wide open, often around f/5.6 to f/8, although this varies by lens. Smaller apertures add depth of field but also bring in diffraction, which softens the whole image. On full frame, diffraction becomes visible around f/16. On APS-C, it shows around f/11, and on Micro Four Thirds, around f/8.
Go narrower only when the scene needs it, such as a close foreground and a distant ridge that cannot both be sharp at f/8 to f/11. In that case, focus stacking at f/8 usually gives a cleaner result than stopping down to f/22. For how focal length and distance change depth of field, see choosing the right f-stop for landscape photography. If the term itself is new, what is an f-stop in photography? explains the numbers.
ISO: keep it at base when you can
Base ISO gives the cleanest files and the most room to lift shadows in editing. On a tripod there is usually no reason to raise it. Raise ISO when you need to freeze movement or handhold in low light, such as with wind-blown foliage, handheld shots, or the Milky Way. A slightly noisier frame that is sharp is usually better than a clean frame that is blurred. For how base ISO and dynamic range trade off, see what ISO to use for landscape photography.
Shutter speed: set by light and motion
Shutter speed changes most often. For handheld shots, a practical minimum is 1/(focal length × crop factor). A 50 mm lens on an APS-C camera (1.5× crop) needs about 1/75 s or faster. On sensors above about 45 MP, the rule often needs a shutter speed about twice as fast. Image stabilization helps with camera shake, but it does not freeze a moving subject.
On a tripod, any shutter speed works for a still scene. Use a fast speed to freeze moving leaves or waves, or a slow speed to blur water or clouds. For speeds by subject, see what is a good shutter speed for outdoor photography?
Focus: put it where sharpness matters
Focus decides which part of the scene is sharpest, so it matters as much as aperture. The one-third rule (focus about a third of the way into the scene) is a rough starting point, not a fixed law. For a more precise approach, focus at the hyperfocal distance, which puts the sharp zone from about half that distance to infinity. Focus manually in magnified live view when you can, and check the nearest and farthest parts of the frame separately. For a worked method, see where to focus in landscape photography.
Exposure and bright skies
The camera’s meter reads the whole frame, so a bright sky can leave the land dark or the sky blown out. Check the histogram rather than the LCD, since the screen is hard to judge in bright light. Protect the highlights first, because blown highlights cannot be recovered in editing while shadows often can. For high-contrast scenes, bracket three to five frames one to two stops apart, or use a graduated ND filter. The full method is in how to expose landscape photos with a bright sky.
Which shooting mode to use
Aperture priority is the most common landscape mode: you set the f-stop, and the camera sets the shutter speed. Manual mode suits panoramas, bracketed sequences, long exposures with ND filters, and night shots. Program and full auto often choose wide apertures and high ISO, so they are usually not the best choice for landscapes. For the details, see what mode is best for landscape photography?
Adjusting for the subject
There is no single best setting outdoors. The priorities change with the subject: landscapes need depth and low noise, while wildlife needs fast shutter speeds and macro needs careful control of depth. Waterfalls need a slow shutter, a tripod, and often an ND filter. For a step-by-step method, see how to photograph waterfalls with a slow shutter speed. For other genres, see best camera settings for outdoor and nature photography.
Common mistakes
- Stopping down to f/22 for sharpness. Diffraction softens detail, and focus stacking usually gives a better result.
- Leaving image stabilization on while the camera is on a tripod. Many lenses advise turning it off, and some detect a tripod automatically.
- Trusting the LCD. Screen brightness misleads, so judge exposure with the histogram.
- Assuming the infinity mark on the lens is exact. Many lenses focus slightly past infinity.
- Using auto ISO on a tripod. It can raise ISO when a longer exposure would have been cleaner.
Final checklist
- Tripod on firm ground, with a timer or remote set.
- Mode set to aperture priority or manual, base ISO, RAW.
- Aperture at f/8 to f/11 unless the scene needs a different depth.
- Shutter speed set for the light and the motion you want.
- Focus checked at 100% on the nearest and farthest parts of the frame.
- Histogram checked for clipped highlights.
Safety
Arrive before dawn or leave after dusk with a headlamp and a route you know. Keep your footing on wet rock and near edges.