Camera Settings

How to Photograph Waterfalls With a Slow Shutter Speed

Textured waterfall shots need about 1/4 to 1/2 second, silky ones 1 to 2 seconds or more. Use a tripod, base ISO, and an ND filter in bright light.

On this page
  1. Choose the look first
  2. Starting settings and a test shot
  3. Getting slow enough in bright light
  4. Light and exposure
  5. Diffraction when you stop down
  6. Stability on the tripod
  7. Mean-stacking without ND
  8. Spray and cleaning the lens
  9. Higher flow and seasons
  10. Safety at the falls
  11. Common misconceptions

A slow shutter turns moving water into the soft, silky look many people want from a waterfall. The time you need depends on the flow and on how smooth you want the water. As a starting point, aim for about 1/4 to 1/2 second for texture, 1 to 2 seconds for silky water, and 2 to 4 seconds or more for very smooth water. Use a tripod, an aperture of f/8 to f/11, and base ISO.

Choose the look first

Look Shutter time What it shows
Frozen 1/500 to 1/1000 s or faster Spray, splashes, and detail in the flow
Textured 1/4 to 1/2 s Some structure in the water
Silky 1 to 2 s Smooth water that still shows the shape of the fall
Very smooth 2 to 4 s or longer Soft, milky water, but large falls can lose detail

Longer is not always better. Very long exposures can make a large fall look like featureless fog, so choose the time that keeps the shape you want.

Starting settings and a test shot

Set the camera on a tripod, use base ISO, and start at f/8 to f/11. Shoot in manual or aperture priority. Take a test shot, look at the water at 100%, and adjust the shutter time. If the water looks too choppy, slow the shutter. If it loses too much detail, speed it up.

Shoot several frames. The water pattern changes from frame to frame, so you can pick the best one, or blend a few.

Getting slow enough in bright light

In bright light, base ISO and f/11 may still give a shutter speed that is too fast. A neutral density (ND) filter cuts the light so you can use a slower shutter time.

  • ND8 (0.9) cuts 3 stops.
  • ND64 (1.8) cuts 6 stops.
  • ND1000 (3.0) cuts 10 stops.

Each stop doubles the shutter time. For example, 1/8 s with 3 stops of ND gives 1 s, and 1/15 s with 6 stops gives about 4 s. In shade, 3 to 6 stops is often enough, so you rarely need a 10-stop filter for a waterfall.

A polarizer cuts glare on wet rocks and foliage. It darkens the image by about 1.5 to 2 stops, which also slows the shutter, so account for it in your settings.

Light and exposure

Overcast light or full shade is the most forgiving. Dappled sun puts bright hot spots on white water, and those clip. If the sun is on the falls, check the histogram, and consider a different time of day or a different angle.

Diffraction when you stop down

If the light is bright and you have no ND filter, you may be tempted to stop down to f/16 to get a slower shutter. That brings in diffraction, which softens detail. Keep to base ISO, and use an ND filter instead of stopping down a long way.

Stability on the tripod

Set the tripod on solid rock. Soft or flowing ground lets the legs move during a long exposure. Use a 2-second timer or a remote release. If the lens manual advises it, turn image stabilization off on a tripod. Some newer systems detect a tripod automatically.

Mean-stacking without ND

Without an ND filter, you can approximate a long exposure by taking several short frames and averaging them in software. For example, 10 frames at 1/4 s give a total time of 2.5 s, and the averaged result looks softer than a single frame. The water pattern will not match a true long exposure exactly, but it can work well for moving water.

Spray and cleaning the lens

Spray can land on the front element. Wipe it with a microfiber cloth between frames, and use a lens hood to keep off splashes. Where you can, avoid standing directly in the spray.

Higher flow and seasons

Flow changes with rain and snowmelt. After heavy rain, the same look needs a shorter shutter time. Check the flow before you set your times, and recheck when you return.

Safety at the falls

Wet, algae-covered rocks are extremely slippery. Stay on trails and behind barriers. Never stand at the brink of a fall, and do not wade in fast water above a drop. Watch for sudden flow increases below dams or during storms, and move away from the water if the level rises.

Common misconceptions

  • “Longer is always better.” Very long exposures can turn large falls into featureless fog.
  • “You need a 10-stop ND.” In shade, 3 to 6 stops is often enough.
  • “Silky water hides camera shake.” Rocks and foliage still show blur.
  • “Bright sun is fine with enough ND.” Highlights on white water still clip.

For the shutter speeds used across other subjects, see what is a good shutter speed for outdoor photography?. For the ISO you can use at base, see what ISO to use for landscape photography. For the wider exposure approach, see the best camera settings for landscape photography.

The complete guide to camera settings

The Best Camera Settings for Landscape Photography
Read the guide

Keep exploring

Guides from other topics

All topics →