An f-stop is a number that describes how wide a lens opening is. It is the focal length divided by the diameter of the opening, so f/8 means the opening is one-eighth of the focal length across. Smaller numbers mean wider openings: f/2.8 lets in much more light than f/16, and it gives a shallower depth of field.
How the f-number is calculated
Divide the focal length by the effective diameter of the opening. A 50 mm lens set to f/2 has an opening of about 25 mm (50 ÷ 2). At f/8, the same lens has an opening of about 6.25 mm (50 ÷ 8).
The full-stop sequence
Standard full stops run like this:
| Step | F-number |
|---|---|
| 1 | f/1 |
| 2 | f/1.4 |
| 3 | f/2 |
| 4 | f/2.8 |
| 5 | f/4 |
| 6 | f/5.6 |
| 7 | f/8 |
| 8 | f/11 |
| 9 | f/16 |
| 10 | f/22 |
| 11 | f/32 |
Each step multiplies the f-number by about 1.4, which is the square root of 2. Each step also halves the area of the opening, so the light is halved.
Why each full stop halves the light
Because the light depends on the area of the opening, the change in light is larger than the change in the number suggests:
- f/2.8 to f/5.6 is 2 stops, which means 4 times less light.
- f/4 to f/16 is 4 stops, which means 16 times less light.
- f/4 to f/8 is 2 stops, which means 4 times less light, not half as much.
A stop is also a unit of exposure. Changing aperture, shutter speed, or ISO by one stop changes the light by the same amount, which is why you can trade one for another. To see how aperture, shutter speed and ISO fit together as the exposure triangle, read the landscape photography lessons article.
Third-stop increments on your camera
Many cameras show apertures in third-stop steps, such as f/4, f/4.5, f/5, f/5.6, f/6.3, f/7.1, and f/8. Each third-stop step changes the light by about a third of a stop. The full-stop numbers above are the common reference points.
How f-stops control depth of field
A smaller opening (higher f-number) gives more depth of field, so more of the scene from near to far is sharp. A larger opening (lower f-number) gives a shallower zone of focus and a softer background. The f-stop is only one factor. Focal length, focus distance, and sensor size also set how deep the sharp zone is.
Common confusions
- “A higher f-number means a bigger aperture.” It is the reverse. f/16 is a smaller opening than f/2.8.
- “f/4 lets in twice the light of f/8.” It lets in four times as much, which is two stops.
- “The same f-stop gives the same depth of field on every camera.” In principle, the same f-number gives the same exposure. Depth of field differs when you match framing across sensor sizes.
- Variable-aperture zooms, such as an 18 to 55 mm lens marked f/3.5 to f/5.6, lose light as you zoom in. Their maximum aperture changes with focal length.
- Cine lenses use T-stops, which measure light actually transmitted. A T-stop is equal to or slower than the f-stop on the same lens.
Where to go next
For landscape-specific advice, read choosing the right f-stop for landscape photography. To see where to place focus within that depth, read where to focus in landscape photography.