For most landscapes, aperture priority is the best mode. You set the f-stop for the depth you want, and the camera sets the shutter speed to match the light. It is labelled A on Nikon, Sony, and Fujifilm bodies and Av on Canon. Manual mode is the better choice for panoramas, bracketed sequences, long exposures with ND filters, and night shots.
Aperture priority: how it works
In aperture priority, you choose the aperture, and the camera picks the shutter speed from its meter reading. You keep control of depth of field while the camera handles the exposure.
Use exposure compensation when the meter is fooled, such as with bright snow or a dark forest. Compensation typically runs to ±3 EV, and some cameras go to ±5 EV.
Watch the shutter speed the camera picks. If it is too slow to hold the camera steady, raise ISO or use a tripod.
Manual mode and when it wins
Manual mode gives you direct control of aperture, shutter speed, and ISO. It suits these situations:
- Panoramas, where each frame needs an identical exposure. Fix the white balance and use manual focus.
- Bracketed sequences for blending, where you want the same aperture in every frame.
- Long exposures with ND filters, where you set the shutter time yourself.
- Night shots, where the meter may not be reliable.
If you use manual with Auto ISO, the camera also adjusts ISO, which behaves more like semi-automatic. For landscapes, set ISO to base.
Shutter priority: what it is good for, and the limit
Shutter priority (S or Tv) lets you set the shutter time for a motion effect, such as a fixed 1 second for water while the light changes. The camera adjusts the aperture to match. The limitation is depth of field. Because the camera controls the aperture, you can end up at f/4 or f/22 without choosing it.
Program and full auto
Program and full auto choose the aperture and ISO for you. They often pick a wide aperture or a high ISO, which can cost depth or add noise. They suit a quick snapshot, not a planned landscape.
Bulb and timed exposures
Bulb (B) holds the shutter open for as long as you hold the release, or for a time you set on a remote. Use it for exposures longer than about 30 seconds. Some cameras also offer timed modes that run for up to 15 to 30 minutes.
Metering with ND filters and brackets
Dark ND filters can fool the meter. Meter without the filter, then add the filter’s stops to the shutter time. For example, if the meter reads 1/30 s and the filter is 10 stops, the exposure is about 30 s.
Auto exposure bracketing also works in both modes. In aperture priority the shutter changes between frames. In manual, the shutter changes and the aperture stays fixed.
Custom and scene modes
Custom modes (C1, C2, or U1, depending on the camera) can store a landscape setup, such as f/8, ISO 100, a 2-second timer, and RAW. Scene modes labelled “Landscape” mainly change the JPEG look, such as saturation and contrast, and they leave RAW files unaffected.
Common misconceptions
- “Pros only shoot manual.” Many use aperture priority with exposure compensation.
- “The landscape scene mode gives pro results.” It is a JPEG preset with little control over aperture.
- “Shutter priority controls depth of field.” Aperture does, so shutter priority can leave you at f/4 or f/22.
- “Manual mode guarantees correct exposure.” You still need the meter and the histogram.
For the settings that go with each mode, see the best camera settings for landscape photography. For how the f-number changes depth, see choosing the right f-stop for landscape photography.