Landscape photography rewards preparation. The scene usually stays put, so you have time to plan the light, choose a viewpoint and check your exposure. This landscape photography tutorial follows an order that works well in the field: light, planning, camera setup, composition, exposure control, and the habits that improve your results over time.
Start with the light
Light changes the mood of a landscape more than almost anything else. The golden hours, the periods just after sunrise and just before sunset, give soft, warm light with long shadows. Golden hour is roughly the first and last hour of sunlight, but its length changes with latitude and season, so check the times for your location.
Blue hour falls in civil twilight, when the sun sits between about 0 and 6 degrees below the horizon. It lasts roughly 20 to 40 minutes, and its cool, even light suits cityscapes and water.
Midday light is harsh for many subjects, but it isn’t unusable. It can suit forests, overcast scenes and black-and-white work.
Plan before you leave
Planning often decides whether a session works. A sun and moon planner such as PhotoPills, The Photographer’s Ephemeris or PlanIt Pro shows where the sun and moon will rise and set, so you can set up in the right place. For scouting where to shoot, see how to find great landscape photography locations. For weather, check cloud cover and visibility as well as rain, using an app such as Clear Outside or Windy.
Plan the walk back too. Many landscape shots happen around sunrise or sunset, so you may return in the dark. Carry a headlamp and a backup light. If you’re heading off-trail, mark your vehicle’s location with GPS, and bring a paper map and a compass as a backup.
Set up the camera for sharpness
Aperture. Most lenses are sharpest at about f/8 to f/11. As you stop down further, diffraction softens the image. On full-frame cameras the softening becomes visible past about f/16, and smaller sensors and high-resolution sensors show it sooner. f/22 isn’t automatically sharper. For more, see choosing the right f-stop for landscape photography.
Hyperfocal distance. To keep both the foreground and the distance acceptably sharp, focus at the hyperfocal distance. You can estimate it with H = f² ÷ (N × c) + f, where f is the focal length, N is the f-number and c is the circle of confusion (about 0.03 mm on full frame and 0.02 mm on APS-C). For a 24 mm lens at f/11 on full frame, the hyperfocal distance is about 1.8 m, and everything from about 0.9 m to infinity is acceptably sharp. Guessing a point a third of the way into the scene doesn’t give the same result.
ISO. Use the base ISO, typically 64 to 200 on most cameras, for the greatest dynamic range. Raise ISO when you need a faster shutter speed or a smaller aperture, and check your files if noise becomes a problem.
Tripod and timer. For slow shutter speeds, use a tripod. Trigger the shutter with a two-second timer or a remote, use electronic first-curtain shutter if your camera offers it, and turn image stabilization off on a tripod (some systems detect a tripod automatically). For when a tripod is essential, see do you need a tripod for landscape photography.
Histogram. The LCD on the back of the camera can look brighter or darker than the final image. Check the histogram to see whether highlights or shadows are clipping, and let it guide your exposure.
Build the composition
Horizon. Keep the horizon level unless you’re tilting it on purpose. Placing it near the middle splits the frame evenly, which can work but often feels static. Moving it up or down gives more emphasis to the sky or the land.
Foreground. A rock, a path or a patch of flowers close to the lens adds depth and a sense of place. Getting low makes a close foreground stronger, and a person or tree can show scale.
Leading lines. Roads, rivers, shorelines, fences and rows of trees can lead the eye toward the main subject.
Vantage points. Try alternate angles: low, high, looking up through branches, or looking down at patterns in rock or sand. Moving a few steps often changes a scene more than changing lenses.
Orientation. Choose a horizontal or vertical frame based on the subject and where the image will be used. Wide mountain scenes often suit horizontal frames, while tall waterfalls or trees may suit vertical ones. For more on what orientation means, see what landscape means in photography.
Simplicity. Remove distractions. Many strong landscape images use fewer elements, with a clear subject and simple shapes. If the sky is flat, reduce how much of it appears in the frame, or look for a reflection in water.
Control exposure and motion
Bracketing. For high-contrast scenes, take three to five frames about 1 to 2 EV apart, then blend them. Use a tripod so the frames line up.
Polarizers. A circular polarizer reduces reflections and deepens the sky. It works best when you’re at about 90 degrees to the sun. On wide lenses, around 24 mm and wider, it can darken the sky unevenly.
Neutral density (ND) filters. ND filters reduce the light so you can use longer shutter speeds in daylight. An ND8 cuts 3 stops, an ND64 cuts 6 stops, and an ND1000 cuts 10 stops. Ten stops multiplies the exposure by 1,024, so a 1/60 s exposure becomes about 17 seconds.
Graduated ND filters. These are usually 2 or 3 stops and balance a bright sky with darker land. Use a soft transition for uneven horizons and a hard edge for flat ones.
Long exposures. Waterfalls often look silky at about 1/4 to 2 seconds. Smooth seas and streaked clouds often need 30 seconds or more. Choose the speed based on how much motion you want to show.
Focus stacking and night shots
Focus stacking. When the foreground is closer than hyperfocal focusing can cover, take several frames focused from near to far, then combine them in software. Keep the camera still for the whole sequence.
Night and the Milky Way. A common starting point for photographing the Milky Way is f/2.8, ISO 3200 to 6400 and 15 to 25 seconds. The 500 rule (500 divided by focal length) is too loose on high-resolution sensors, so the NPF rule gives a better estimate of how long you can expose before stars trail. In the Northern Hemisphere, the galactic core is best seen from about February or March to October, and it’s easiest to see near a new moon.
Keep learning from your results
Review EXIF data from your keepers and your rejects. The settings saved with each image show what worked and what didn’t. Revisit the same location in different light, because that is one of the fastest ways to see how a scene changes.
For structured learning routes, see landscape photography lessons. For deadlines and critique, see landscape photography competitions. To see how established photographers handled light and composition, start with who is best known for landscape photography. And for how your file format affects editing, see RAW vs JPEG for landscape photography.
Safety on location
- Don’t set up on busy paths, roads or narrow ledges.
- Keep well back from cliff edges, especially in wind.
- Tripods can blow over near cliffs or in surf, so weigh them down.
- On coastlines, check tide times and watch for rogue waves.
- Never look at the sun through an optical viewfinder.
- Carry a headlamp and warm layers for twilight and night shoots.
- Check access rules, permits and drone laws before you shoot.